galerija

YTF2

na upit

Detalji

Savršen partner za naporan radni dan

Kada imate potrebu za nečim zaista posebnim, naše najnovije vozilo u ponudi, YTF2 će Vam olakšati posao zahvaljujući mnogim standardnim značajkama kao što je pneumatski kip sustav nosivosti do čak 363 kg. Pogonjen pouzdanim 357 ccm Yamaha agregatom sa malim emisijama štetnih plinova. Kombinacija amortizera, ovjesa i snažnog „HybriCore™“ okvira, samo podešavajućih bubanj kočnica na svim kotačima i bešavnih obloga sjedala znači da Vam je osigurana uglađena i komforna vožnja. YTF2 je pouzdan, snažan i udoban dok istovremeno nije zahtjevan za održavanje i cijene servisa su minimalne. I ono najbolje: raditi će naporno, kao i Vi.

Nitko ne tvrdi kako je cjelodnevni rad na golf terenima lagan, ali zbog YTF2 se čini tako. Neumoran radnik, dizajniran za rad, ovo je savršeni partner koji će Vam olakšati posao. Zasigurno će Vam biti od velike pomoći sa svojim 357 ccm agregatom i nagibnim utovarnim prostorom sa snagom koju zaista trebate. Čvrst i pouzdan, naša jedinstvena šasije je snažnija i lakša nego ikad prije. Neka Vas ne zavara stilizirani izgled – YFT2 je spreman za težak rad. Povesti će Vas na sva mjesta kako bi Vaš golf teren izgledao zaista sjajno.

Detalji:

  • Yamaha 357 ccm benzinski agregat
  • Male emisije štetnih plinova
  • Lagan i snažan „HybriCore™“ okvir
  • Armatura u auto stilu
  • Kočnice na svim kotačima
  • „Heavy-duty“ ovjes
  • Apsorbirajući prednji odbojnik
  • Uljni sustav bez filtra
  • Prednja i stražnja svijetla
  • Jednostavan upravljač
  • Snažni i fleksibilni plastični paneli
  • Udobno sjedalo

Tehnički podaci

Dimensions    
Overall length   2.922 mm
Overall width   1.243 mm
Overall height   1.200 mm bez krova
Wheel base   1.917 mm
Front wheel tread   990 mm
Rear wheel tread   980 mm
Minimum ground clearance   115 mm
Power supply/Drive train    
Engine type   Yamaha built, low emission single cylinder 60° incline OHV
Displacement   357 cm³
Bore x stroke   85 mm x 63 mm
Horsepower   8.5 kW @ 3.500 okr/min
Compression ratio   8.1 : 1
Lubrication system   Splash-style positive oil lubrication
Oil tank capacity   1 litres
Air cleaner   Two-stage, urethane-foam pre-cleaner and high-capacity pleated paper cartridge
Cooling system   Forced air
Carburetor   Mikuni BV26-18
Ignition system   TCI
Transaxle   EnduraDrive V-belt automatic forward/reverse transaxle equipped with high-precision helical gears, 11.48 : 1 drive axle ratio
Chassis    
Frame   HybriCore™ Chassis features a robotically welded automotive ladder-style frame mated to a polypropylene structural floor. Frame components are protected with a multi-step full-immersion phosphate treatment, electro-deposition epoxy-base coating, and an electrostatically applied polyester/urethane powder topcoat
Body   Custom-formulated thermoplastic olefin, and the front painted with a two-part top coat of high-luster automotive-grade polyurethane
Steering   Self-compensating double reduction helical rack-and-pinion, permanently lubricated with sealed, greaseless tie-rod ends
Front suspension   Tru-Trak II™ fully independent automotive-style strut suspension
Rear suspension   Unit swing arm with coil springs over hydraulic shock absorbers
Brakes   Self-adjusting, mechanical drum brakes on all 4 wheels
Seating   Seamless, fabric-backed vinyl bonded to pure, virgin foam contoured seat cushions and mated to a warp- and moisture-resistant polypropylene bottom, strengthened with plated steel inserts
Bumpers   Front 8 km/h energy-absorbing bumper
Performance    
Maximum forward speed   24 km/h
Maximum reverse speed   18.4 km/h
Turning radius   3.3 metre
General    
Dry weight   384 kg
Cargo box material   Roto-molded linear Polyethylene
Cargo bed capacity   363 kg
Cargo bed size (LxWxH)   1,209 mm x 1,243 mm x 356 mm
Cargo bed load height   609 mm
Fuel tank capacity   22 litres
Tyre size   Front: 18.00 x 8.50-8.00 (4-ply rating), Rear: 18.00 x 8.50-8.00 (6-ply rating)
Seating capacity   2 persons

Dokumenti

pdfyamaha-2010-ytf2.pdf (1,82 mb)

Izdvojeni proizvodi